Skip to product information
1 of 1

BC-1506 PU Foam Applicator Gun

BC-1506 PU Foam Applicator Gun

🎫 Secure payments

SKU:V238-SUPDZ-12339247808592

Regular price $61.99 AUD
Regular price Sale price $61.99 AUD
Sale Sold out
Shipping calculated at checkout.
Quantity

Low stock: 33 left

The BC-1506 PU foam applicator gun is a manual tool for sealing, filling and insulating small gaps. It combines an aluminium alloy body, a sprung steel trigger and a brass nozzle with a PP handle.

Key Features

  • Sprung trigger and flow adjustment screw control foam output.
  • Nickel-coated steel trigger and barrel.
  • Zinc alloy adaptor with a Teflon coating.
  • Stainless steel sealing needle.
  • Compact manual design.

Specifications

Model
BC-1506
Power source
Manual
Body material
Aluminium alloy
Tube material
Coated steel
Trigger material
Nickel-coated steel
Adaptor material
Zinc alloy
Adaptor finish
Teflon coating
Needle material
Stainless steel
Nozzle material
Brass
Barrel material
Nickel-coated steel
Barrel length as listed
19cm
Tube length as listed
18.5cm
Handle material
PP
Sizes listed for use
750ml and 500ml
Gun dimensions (L x W)
32.5 x 15cm
Nozzle diameter
2mm
Colour described
Stainless-steel silver and black

Package Contents

  • 1 x PU foam applicator gun
  • 1 x plastic tube
  • 2 x plastic nozzles
  • Packed in a triangular cardboard box

Preparing the Foam Gun

  1. Shake a can of gun foam vigorously.
  2. Screw the can onto the gun adaptor without overtightening.
  3. Release the flow adjustment screw slightly and dispense foam immediately to fill the gun with foam.
  4. The gun is then ready for use. Control foam output with the flow adjustment screw.

After Use

  1. Leave the gun filled with foam and keep a filled can of gun foam attached.
  2. Tighten the flow adjustment screw completely. Do not empty the gun; the original instructions require it to remain filled to prevent foam curing through exposure to air humidity.
  3. Store the can vertically with the gun pointing upwards.

Using the Gun Again

  1. Shake the can vigorously while holding the gun.
  2. Carefully remove cured foam from the nozzle tip with a small, sharp knife, as directed in the original instructions.
  3. Release the flow adjustment screw slightly and dispense immediately until the foam flows correctly.
  4. The gun is ready to use. Control output with the trigger.

Replacing the Foam Can

  1. Check whether the can is empty by dispensing foam into a waste bin until no more foam is released.
  2. Shake a new can of gun foam vigorously.
  3. Unscrew the empty can with the valve opening pointing away from you. Remove released foam from the adaptor and immediately fit the new can.
  4. Dispense foam immediately to fill the extension tube.

Cleaning During an Interruption

  1. Unscrew the foam can with the valve opening pointing away from you.
  2. Screw a can of gun cleaner onto the gun.
  3. Pull the trigger to fill the gun with cleaner.
  4. Leave the cleaner in the gun for about five minutes.
  5. Pull the trigger again to refill the gun with cleaner.
  6. Unscrew the cleaner can.
  7. Screw a can of gun foam onto the gun.
  8. Pull the trigger until foam is released and the cleaner has been completely removed. The gun is then ready to use.
V238-SUPDZ-12339247808592V238-SUPDZ-12339247808592

Product details and suitability

Intended audience
  • DIY renovators
  • Installers applying expanding foam
Use cases
  • Sealing and filling gaps
  • Controlling expanding foam application
Suitable for
  • Compatible 500 ml and 750 ml screw-on foam cans
Not suitable for
  • Foam canisters without a compatible screw-on gun-grade valve
View full details